1. Hydroxypropyl Methyl Cellulose (HPMC)

Hydroxypropyl Methyl Cellulose is a non-ionic type cellulose ether polymer. With special modification, our HPMC can be used to control thickening, water demand, workability, sag resistance and other important properties of the final product. It is widely used as thickener, adhesive, water retention agent, film forming agent and emulsifier in construction, building materials, dispersed coating, cosmetic, medicine, food, leather, ink and paper making, etc.

2. Methyl Hydroxyethyl Cellulose (MHEC)

Methy hydroxyethyl cellulose is a middle degree of polymerization. It can be dissolved in cold water and hot water. Because of its good dispersibility, it won’t stick together. It is mainly used as adhesive protective gelatin, thicker agent and stabilizing agent as well as additives to make emulsion, frozen gelatin, lotion , suppository and tablets.

3. Hydroxyethyl Cellulose (HEC)

Hydroxyethyl cellulose is a nonionic cellulose derivative that dissolves readily in water, either cold or hot. As a nonionic surfactant, HEC has the functions such as thickening, suspension, emulsification, adhesion, film formation, dispersion, water retention, providing protection and so on.

4. Carboxymethyl Cellulose (CMC)

Carboxymethyl Cellulose sodium is a polyanionic cellulose ether. It has good solubility in both hot and cold water. It is used in drilling mud, in detergents as a soil-suspending agent, in resin emulsion paints, adhesives, printing inks, textile sizes, as stabilizer in foods, as protective colloid in general, as pharmaceutic aid (suspending agent; tablet excipient; viscosity-increasing agent).

5. Ethyl Cellulose (EC)

Ethyl Cellulose is mainly used as adhesive for tablets and coatings as well as framework. EC can be made to sol framework. Micro hole film coating for controlled released matrix agent. Also be used as disperse agent, water keeping agent to avoid losing water and deteriorating improving storage.

Redispersible polymer powder is a free-flowing, white powder obtained by spray drying of high polymer Emulsion, it has a good redispersible ability and can be emulsified into stable polymer-emulsion again when mixed with water. Its chemical property is exactly same as the initial emulsion. Widely used in tile adhesive, wall putty, flexible adhesive mortar, skim coating and level ground material.

This product is in line with the national standard GB8076-2008 for the superplasticizer index. It is a green environmental product with good comprehensive index and no pollution, which has high water reduction rate, good dispersion, and excellent adaptability with cement and gypsum, good fluidity.

Calcium formate is the calcium salt of formic acid. It is produced synthetically by reacting calcium oxide or calcium hydroxide with formic acid. It can be used as new type feeding addictive, adaptable for sorts of acidogenic mold inhibitor of feedstuff. It has the function of preventing diarrhea and dysentery and promoting digesting and absorbing. It can be used as quick solidification agent, lubricant agent and early strength agent of cement. It can be widely used in the production of high grade leather and many other chemicals.

Hydroxypropyl starch is a kind of starch ether, with good ability to be applied in construction and building industries. It can improve the performance and optimize the workability of dry mortar by modification the thickness and rheology of dry mortars based on gypsum, cement, lime, etc. It can perform well in neutral and alkaline conditions, and it is compatible with other additives in gypsum-based and cement-based building materials.

Gypsum retarder has supper retarding performance with low dosage. It can make gypsum’s setting time adjust optionally. Using Gypsum retarder, there is a small strength loss of hardened gypsum based products. It can be apply to plaster gypsum, plaster adhesives, plaster precast, gypsum filler, gypsum mode, and gypsum decorating coating.

Silicone Hydrophobic Powder is a fine, free flowing powder, specifically designed as a hydrophobic additive for demanding cementitious drymix formulations.

It was developed to offer the performance of a liquid silicon-based hydrophobic material in dry delivery systems. It can be used in many application areas where the protection of the substrate from liquid water ingress is a critical issue.

1. C5 Aliphatic Resin

C5 Hydrocarbon Resins are light yellow aliphatic resins produced from petroleum. These thermoplastic resins can be produced with a wide range of desirable properties. Depending on the application, they can be tailored for color, softening point, molecular weight, and acidity. It is widely used in adhesive and thermoplastic paint.

C9 Hydrocarbon Resins are aromatic thermoplastic resins. Depending on their grade, their color ranges from light yellow to dark brown. C9 Hydrocarbon Resins have a large range of thermal stability and viscosity. They work well with other resins in most formulas, such as EVAs. Due to their low cost and ease of miscibility, they are widely used in industrial grade products. Widely used in adhesive, rubber, paints and printing inks.

3. C5/C9 Copolymer Resin

C5/C9 Copolymerized Hydrocarbon Resins are thermoplastic resins with advantages of the both C5 and C9 hydrocarbon resins: low acid value, great miscibility, waterproof, ethanol resistance, chemical resistance and acid resistance. They improve the formula they are in by providing good thermal stability, weather resistance, protection from ultraviolet degradation and controlled modification of viscosity. C5/C9 Hydrocarbon Resins have an enhanced compatibility in various elastomers and synthetic rubbers.

4. Hydrogenated C5

C5 Hydrogenated Hydrocarbon resin's main raw material is cracking C5 and is obtained by hydrogenation, to achieve high-quality, multi-purpose water-white thermoplastic Hydrocarbon resin.C5 Hydrogenated Hydrocarbon resin is mainly used for hot-melt adhesives, hot melt pressure sensitive adhesive tackifiers, product have the property of good thermal stability, low odor, and good compatibility With SIS, SBS, and E VA.

5. Hydrogenated C9

C9Hydrogenated Hydrocarbon Resin is water-white thermoplastic resin obtained from polymerizing of Aromatic and hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), Styrene Butadiene Styene block copolymer(SBS),Styrene Isoprene Styene block copolymer(SIS).

6. DCPD Resin

DCPD has good activity and solubility using in high-grade rubber with light color and high bromine value. It can be used as modifier, which can reduce the coating costs, reduce the contraction of the epoxy resin, improve the adhesion of coatings, enhanced wettability on color, and improve the coating flow property. This kind of resin can be used in the printing ink to enhance the printing performance.

Nitrocellulose product is produced through a reaction of natural cellulose and nitrating acid. Following by complex washing and stabilizing stages, then add damping agent or plasticizer to make into Nitrocellulose Cotton or Nitrocellulose Chips, or Further, dissolve the Nitrocellulose Cotton and Chips in different solvents to make into Nitrocellulose Solution product.

Polyester resin are the thermosetting polyester resin series which used in powder coating, Hybrid polyester resin, TGIC curing resin and HAA curing resin, three types in all. Each type can be divided into several products which can meet customer’s different requirements on gloss, mechanical properties, texture, and cost performance and so on. The products have advantages of high gloss, good leveling, good mechanical resistance, and excellent weatherability, with stable and reliable quality.

According to the manufacturing process, they mainly classified as sulfuric acid and chlorination titanium dioxide pigments for PVC industrial, paint, ink, rubber and etc.

Cellueas™ Hydroxye thylcellulose (HEC), a nonionic water- soluble polymer, is a white to light powder. 

Polyether Amine (PEA): A type of polymer in which the main chain is a polyether structure and the terminal reactive functional group is an amine group.

It has been widely used in many fields such as polyurea spraying, large composite materials, epoxy resin curing agents and automotive gasoline detergents.

Diethyl toluene diamine is a very effective chain extender of polyurethane elastomer, in particular for RIM (reaction injection molding) and SPUA (Spray Polyurea Elastomer); also can be used as polyurethane elastomer and epoxy resin aromatic diamine curing agent, used for casting, coating, RIM and adhesive, but also is a polyurethane and polyurea elastomer chain extension agent.

C-12 Alcohol Ester is an ideal water-based coalescent agent and has preferable film-forming effect to a various kind of emulsion polymer systems and could reduce minimum film forming temperature. It can be applied in situations that are difficult to form films (e.g. high glass transition temperature, low construction environment temperature ), and is extremely appropriate for various kinds of water-based coating systems such as emulsions, latex paints and adhesives synthesized from methacrylate, cinnamene and vinyl acetate. This product is widely used in emulsions, adhesives and architectural coating.

C-16 Alcohol Ester, also called 2,2,4-trimethyl-1,3-pentanediol diisobutyrate (TXIB), is a kind of non-toxic plasticizer without benzene ring. As a kind of multipurpose plasticizer, it can mix with all universal primary and secondary plasticizer, also completely compatible with PVC in all proportions and is usually blended with general-purpose plasticizers such as DOP or DOTP.

C-16 Alcohol Ester is a fully environment-friendly film forming accelerator. C-16 Alcohol Ester can improve film performance and construction performance of coatings, such as mending and scrubbing resistance, and improve weather resistance of coatings

Fenchem has wide range of UV absorbers for coatings, rubbers, plastic, cosmetic, etc.

Hindered amine

Benzotriazole

Benzophenone

Benzoate

Triazine

Etc.

Hindered phenol Antioxidant

Phenolic Antioxidant 

Phosphite Antioxidant

Compound Antioxidant

PMS MONOMER

PMS monomer is suggested for evaluation as a replacement for vinyltoluene and styrene monomers. PMS monomer has chemical properties and polymerization behavior similar to both vinyltoluene and styrene monomers.

Typical Isomer Distribution: 97% Para, 3% Meta

Use of PMS monomer as a partial or complete replacement for styrene monomer in unsaturated polyester resin applications results in lower resin vapor pressure at any temperature and a higher flashpoint. Lower shrinkage during molding, higher thermal properties and greater tensile strength in glass-filled applications can be expected from polymerized resin products.

PMS monomer can replace styrene monomer in homopolymers, impact polymers, acrylonitrile-butadiene terpolymers, specialty copolymers, elastomers and thermosetting polyesters. Homo and copolymers prepared from PMS monomer have been found to possess lower specific gravity, higher flow properties and improved heat distortion than the corresponding styrene-based analogs. In thermosetting polyester applications, higher heat distortion, faster molding cycles, and better electrical properties have been demonstrated. Also, fire retarding properties can be obtained with lower dosages of flame retardant additives and the molecular structure of PMS polymers can be modified through radiation and chemical crosslinking.

Widely used in both water based and oil based paints and inks. 

C-16 Alcohol Ester, also called 2,2,4-trimethyl-1,3-pentanediol diisobutyrate (TXIB), is a kind of non-toxic plasticizer without benzene ring. As a kind of multipurpose plasticizer, it can mix with all universal primary and secondary plasticizer, also completely compatible with PVC in all proportions and is usually blended with general-purpose plasticizers such as DOP or DOTP.

C-16 Alcohol Ester is a fully environment-friendly film forming accelerator. C-16 Alcohol Ester can improve film performance and construction performance of coatings, such as mending and scrubbing resistance, and improve weather resistance of coatings

1. C5 Aliphatic Resin

C5 Hydrocarbon Resins are light yellow aliphatic resins produced from petroleum. These thermoplastic resins can be produced with a wide range of desirable properties. Depending on the application, they can be tailored for color, softening point, molecular weight, and acidity. It is widely used in adhesive and thermoplastic paint.

 2. C9 Aromatic Resin

C9 Hydrocarbon Resins are aromatic thermoplastic resins. Depending on their grade, their color ranges from light yellow to dark brown. C9 Hydrocarbon Resins have a large range of thermal stability and viscosity. They work well with other resins in most formulas, such as EVAs. Due to their low cost and ease of miscibility, they are widely used in industrial grade products. Widely used in adhesive, rubber, paints and printing inks.

 3. C5/C9 Copolymer Resin

C5/C9 Copolymerized Hydrocarbon Resins are thermoplastic resins with advantages of the both C5 and C9 hydrocarbon resins: low acid value, great miscibility, waterproof, ethanol resistance, chemical resistance and acid resistance. They improve the formula they are in by providing good thermal stability, weather resistance, protection from ultraviolet degradation and controlled modification of viscosity. C5/C9 Hydrocarbon Resins have an enhanced compatibility in various elastomers and synthetic rubbers.

 4. Hydrogenated C5

C5 Hydrogenated Hydrocarbon resin's main raw material is cracking C5 and is obtained by hydrogenation, to achieve high-quality, multi-purpose water-white thermoplastic Hydrocarbon resin.C5 Hydrogenated Hydrocarbon resin is mainly used for hot-melt adhesives, hot melt pressure sensitive adhesive tackifiers, product have the property of good thermal stability, low odor, and good compatibility With SIS, SBS, and E VA.

 5. Hydrogenated C9

C9Hydrogenated Hydrocarbon Resin is water-white thermoplastic resin obtained from polymerizing of Aromatic and hydrogenation. The major usages are tackifier for hot melt adhesive(HMA), hot melt pressure sensitive adhesive(HMPSA) because of its good heat resistance and good compatibility with base polymers such as ethylene vinyl acetate(EVA), Styrene Butadiene Styene block copolymer(SBS),Styrene Isoprene Styene block copolymer(SIS).

 6. DCPD Resin

DCPD resin has good activity and solubility using in high-grade rubber with light color and high bromine value. It can be used as modifier, which can reduce the coating costs, reduce the contraction of the epoxy resin, improve the adhesion of coatings, enhanced wettability on color, and improve the coating flow property. This kind of resin can be used in the printing ink to enhance the printing performance.

Hindered phenol Antioxidant

Phenolic Antioxidant 

Phosphite Antioxidant

Compound Antioxidant

Hindered amine

Benzotriazole

Benzophenone

Benzoate

Triazine

Etc.

Fischer-Tropsch(FT) wax is a synthetic wax produced by the polymerization of carbon monoxide under high pressure, a technology used in the emerging natural Gas to Liquid projects. There are several unique characteristics of Fischer-Tropsch wax, like high melting point, low viscosity, and excellent hardness, making it ideal choice in a variety of applications.

Micronized Wax is made of Polyethylene wax, Fischer-Tropsch wax, Polypropylene wax and Modified wax by various micro-differentiation processes. It is an ultra-fine powder with a wide molecular weight distribution. Micronized waxes are widely used in coatings and inks due to their excellent properties. They can enhance the scratch resistance, abrasion resistance, smoothness and anti-stickiness of the surface, and prevent pigment sedimentation. It is an indispensable important additive in the production of coatings and inks.

It is the first device in China that uses pure oxygen instead of air as molecular oxidant. It has the advantages of fast reaction rate, less side reactions, good product quality, continuous production and friendly environment.

Product series: Oxidized Fischer Tropsch Wax (OFT), Oxidized Microcrystalline Wax (OFM), Oxidized Polyethylene Wax (OPE), Oxidized Polypropylene Wax (OPP)

We use subcritical extraction, regional melting crystallization and high vacuum molecular distillation and other technology combinations, to produce 30℃～110℃ medium high temperature, high enthalpy phase change wax products, typical brands are FPC36, FPC40, FPC50, FPC56, FPC62, FPC66 , FPC70, FPC76, FPC80, FPC84, FPC88, FPC92, FPC96, FPC98, FPC104 and FPC110. And we can customize products with any phase change temperature for customers.

Fischer-Tropsch wax is a synthetic wax produced by the polymerization of carbon monoxide under high pressure, a technology used in the emerging natural Gas to Liquid projects. There are several unique characteristics of Fisher-Tropsch wax, like high melting point, low viscosity and excellent hardness, making it ideal choice in a variety of applications.

Polyethylene Wax as processing auxiliary for PVC pipes, road marking adhesive, special-shaped materials, film, wire and cable and other plastics and the ink paste polisher, paper coating and candles. This series of pe wax is the low molecular polyethylene wax. It has high softening points which are similar to the high molecular polyethylene wax, but the melt viscosity and hardness are similar to the paraffin.

Fischer-Tropsch(FT) wax is a synthetic wax produced by the polymerization of carbon monoxide under high pressure, a technology used in the emerging natural Gas to Liquid projects. There are several unique characteristics of Fischer-Tropsch wax, like high melting point, low viscosity, and excellent hardness, making it ideal choice in a variety of applications.